How to Install a Sliding Gate Motor 3 

How to Fit Rack for a Sliding Gate Motor

Before fitting the rack lay it out behind the closed gate to see how it will line up.

finding the correct position of the rack   

To fit the rack start with the gate nearly closed and place the first length of rack on the motors output gear aligned with the mark made previously on the gate.  Using an electric drill attach the rack using tek screws in the centre of the slots in the mounting lugs.

fixing the first length of rack to the gate

Adjust the height of the rack above the output gear so there is a gap of about 1mm.

clearance of the rack