Non-Welded Systems for Aluminium Sliding Gates with Slats set into the Frame
Ideal for DIY installation where the gate is cut to size for easy freighting Australia wide and can be assembled onsite to save money.
We currently install in Brisbane, Sunshine Coast, Gold Coast and Sydney only but get enquires from all around Australia. If you want to be a fabrication or installation partner trade enquires are welcome see this page
Powder Coated Horizontal 65mm Slats 2 gaps
65mm horizontal slats only with either a 9mm or 20mm gap. Slats are friction fitted into pre-punched holes that is very quick to put together, budget friendly and has cleans lines with no welds or gaps visible. Can be on Driveways that slope across. Available in 8 colours. Corners of frame are right angle cuts not mitred.
Wood Look Horizontal 65mm Slats 2 Gaps
Wood look 65mm slats with either a 9mm or 20mm gap. Slats are friction fitted into pre-punched holes in a wood look frame that is very quick to put together and has cleans lines with no welds or gaps visible. Can be on Driveways that slope across. Kwila or Western Red Cedar. Corners of frame are right angle cuts not mitred.
Powder Coated Horizontal or Vertical 2 Slat Sizes any gap
65mm or 90mm horizontal or vertical slats that can have any gap. Slats screw into channels top and bottom, a cover clips over the screws leaving clean lines with no welds or screws visible. Can be on Driveways that slope across.
8 colours Available. Corners of frame are right angle cuts not mitred.
Wood Look Horizontal or Vertical 2 Slat Sizes any gap
65mm or 90mm horizontal or vertical slats that can have any gap. Slats screw into channels top and bottom, a cover clips over the screws leaving clean lines with no welds or screws visible. Can be on Driveways that slope across.
Kwila or Western Red Cedar. Corners of frame are right angle cuts not mitred.
Powder Coated Horizontal 4 Slat Sizes any gap
Horizontal slats either 38mm, 65mm, 100mm or 150mm with any gap. Slats are screwed into slots in the frame, a cover clips over the screws leaving clean lines with no welds or screws visible. Can be any Colorbond or Powder coat colour.
Corners of the frame are mitred with friction fit and glued corner brackets.
Powder Coated Vertical 4 Slat Sizes any gap
Vertical slats either 38mm, 65mm, 100mm or 150mm with any gap. Slats are screwed into slots in the frame, a cover clips over the screws leaving clean lines with no welds or screws visible. Can be any Colorbond or Powder coat colour.
Corners of the frame are mitred with friction fit and glued corner brackets.
Wood Look Horizontal 4 Slat Sizes any Gap
Horizontal slats either 38mm, 65mm, 100mm or 150mm with any gap. Slats are screwed into slots in the frame, a cover clips over the screws leaving clean lines with no welds or screws visible. Has 35 different Wood Grains.
Corners of the frame are mitred with friction fit and glued corner brackets.
Wood Look Vertical 4 Slat Sizes any Gap
Vertical slats either 38mm, 65mm, 100mm or 150mm with any gap. Slats are screwed into slots in the frame, a cover clips over the screws leaving clean lines with no welds or screws visible. Has 35 different Wood Grains.
Corners of the frame are mitred with friction fit and glued corner brackets.