Timber Picket Sliding Gates

Pictures of Sliding Gates with timber pickets

Quality custom made aluminium or steel gate frames welded together suitable for fitting timber pickets and DIY installation or if you're in Brisbane, Ipswitch, the Gold or Sunshine Coasts we can install an automatic gate frame only for you to fit the pickets yourself or we can do that too.  One of many styles to choose from. 

Ordering

Please feel free to email dimensions of the gate you want along with your name, phone number, email address, location and preferences.    

Sliding Gate Prices including motor and hardware

Diagram of width and height for a sliding gate

What is a Sliding Gate?  

DIY kits include: 1 x Sliding Gate Frame welded and dressed, 2 x wheels, track, keeper, a Block, Rail and Post guide system and a sliding gate motor with two remote controls and a suitable amount of rack. Metal Sheeting and Freighting are NOT included.

Because gate frames are custom made they can be sizes other than the examples below  

Prices for Sliding Gate Frame Only Prices for Sliding Gates Frame Only withTimber Pickets fitted DIY KitPrices for Sliding Gate Frame Only Installed

Telescopic Gate Prices including motor and hardware

Diagram of width and Height for a telescopic gate

What is a Telescopic Gate?  

DIY Kits include: 2 x sliding gate frames welded and dressed, 4 x wheels, a Keeper, track, a Drive mechanism, a block, rail and post guide system and sliding gate motor with two remote controls and a suitable amount of rack. Metal Sheeting and Freighting are NOT included.

Because gate frames are custom made they can be sizes other than the examples below   

Prices for Telescopic Gate Frame Only DIY KitPrices for Telescopic Gate with Timber Pickets fitted DIY KitPrices for Telescopic Frame Only Installed

Pricing for Installation includes: 

The same gate frame(s), motor and hardware as the DIY Kit except a low voltage kit and cabling is installed using a power point on a nearby building. Installing a concrete footing is allowed for off the driveway only (assuming you have a concrete driveway already). 

Pricing for Bi-Parting, Cantilevered and Round the corner Sliding Gates  

We do Bi-Parting, Cantilevered and Round the Corner Sliding Gates too so if you want a quote please contact us 

Pricing for Pedestrian Gates

See Swing Gates 

Pricing for Low Voltage or Solar Powered 

The Motor in the above pricing requires 240V mains power at the gate, if you'd rather have low voltage or solar power this can be added for an extra: $177 for Low Voltage and $645 for Solar Powered. 

Exclusions

If you don't need a concrete footing with an Installed Gate take off $694  

If you already have 240V power at the gate then take $380 off the installation price.

Gates on Sloping Ground 

If your driveway slopes up from the road then the prices above will be the same but if your driveway slopes across please contact us for a quote. 

Frames for Metal Sheeting 

Have a vertical centre support every 700mm to 800mm.

Gates with other types of Metal Sheeting

Please contact us for a quote for sheeting other than Colorbond Custom Orb (corrugated) 

Materials Used: 

Aluminium Sliding Gate frames to 4m wide and Aluminium Telescopic Gates are made from 40mm square section with 3mm wall thickness and bottom rail 40mm x 80mm with 3mm wall thickness.

Aluminium Sliding Gate frames between 4m and 6m wide are made from 50mm square section with 3mm wall thickness and bottom rail 50mm x 100mm with 3mm wall thickness.

Steel Sliding gate frames to 6m and 12m telescopic gate frames are made from 50mm square section with 1.6mm wall thickness with a 75mm x 50mm 1.6m wall thickness. 

Frames larger than this use a size of material depending on how stiff you want the gate and budget, we can design the gate to suit.

A 20mm x 20mm x 1.6mm wall thickness 'C' channel is fitted inside or around the edge of the front face of the gate frame and Colorbond Custom Orb (corrugated) is fitted into the 'C' channel and riveted to it.  The frame comes with 20mm x 20mm x 1.6mm angle vertical supports every 700mm to 800mm that sit in behind the metal sheeting that is also riveted to these supports.   

Finishing 

Aluminium Gate Frames for DIY kits and installed are welded, dressed and powder coated to a colour of your choice.

... Powder Coating Colours