Timber Picket Swing Gates

Picture of Swing Gates with timber pickets

Quality custom made aluminium or steel gate frames welded together suitable for fitting timber pickets and DIY installation or if you're in Brisbane, Ipswitch, the Gold or Sunshine Coasts we can install an automatic gate frame only for you to fit the pickets yourself or we can do that too.

What is a Swing Gate? We do Sliding Gates too 

Ordering

Please feel free to email dimensions of the gate you want along with your name, phone number, email address, location and preferences.  

Single Swing Gate Prices including motor and hardware

Diagram of width and Height for a single swing gate

DIY Kits include: 1 x aluminium gate frame, 1 x pair ball bearing hinges, a hard stop, a King Jet swing gate motor complete with mounting brackets and 2 x remote controls. Timber pickets and Freighting is NOT included.

Installation Include: the same gate frame motors and hardware as the DIY Kit except low voltage power cabling/transformer is installed where there is a power point at the house ...more info.  The installation of posts is not included.

Prices for Single Swing Gate Frame only DIY Kitprices for a Single Swing Gate Frame Only InstalledPrices for a Single Swing Gate with Timber Pickets Installed

Double Swing Gate Prices including motor and hardware

Diagram of width and Height for a double swing gate

DIY Kits include: 2 x aluminium gate frame, 2 x pair ball bearing hinges, a double gate hard stop, King Couper for gates to 4m and King Jet for gates to 6m wide complete with mounting brackets and 2 x remote controls. Timber pickets and Freighting are NOT included.

Installation Include: the same gate frame, motors and hardware as the DIY Kit except low voltage power cabling/transformer is installed where there is a power point at the house and a low voltage cable is run across the driveway ...more info.  The installation of posts is not included.

Prices for Double Swing Gate Frame Only DIY KitPrices for Double Swing Gate Frame Only InstalledPrices for Double Swing Gate with Timber Pickets Installed

Pedestrian Gate Prices including knob set, lock box and hardware

Diagram of width and Height for a pedestrian gate

DIY Kits include: 1 x aluminium gate frame with hard stop and lock box for knob set built into the frame, 1 x pair self closing hinges hinges. Timber pickets, posts and Freighting is NOT included.

To include a pair of posts to fit inside concrete or brick walls are: 1.2m is $44, 1.5m is $55 and 1.8m is $66. 

Installation Includes: the same gate frame and hardware as the DIY Kit.  The installation of posts is not included.

To install a pair of posts inside concrete or brick walls is: 1.2m is $144, 1.5m is $155 and 1.8m is $166. 

Pricing for Pedestrian Gate Frame Only DIY Installprices for a Pedestrian Gate Frame Only Installedpricing of Pedestrian Gate with Timber Pickets Installed

Exclusions from Installation 

If you already have 240V power at the gate then take $380 off the installation price.

Pricing for Low Voltage or Solar Powered 

The Motor in the above pricing requires 240V mains power at the gate, if you'd rather have low voltage or solar power this can be added for an extra: $177 for Low Voltage and $645 for Solar Powered. 

Extras include: 

100mm square galvanised fence posts supply only $43/m inc. GST + freight

100mm square galvanised fence posts installed: 1 x 1.2m is $278, 2 x 1.2m is $455, 1 x 1.5m is $290,

2 x 1.5m is $480, 1 x 1.8m is $303, 2 x 1.8m is $506   

Gates on Sloping Ground 

If your driveway slopes up from the road across the driveway please contact us for a quote. 

Materials and Components Used: 

Aluminium Swing Gate Frames up to 2m per leaf are made from 40mm square section with 3mm wall thickness a 25mm x 25mm tension brace and 1.6mm wall thickness. Swing Gate Frames between 2m and 3m wide per leaf are made from 50mm square SHS Aluminium with 3mm wall thickness and a 25mm square tension brace with 1.6mm wall thickness.  Frames larger than this use a size of material depending on how stiff you want the gate and budget, we can design the gate to suit.

There is a vertical centre support made from 25mm x 25mm x 3mm wall thickness every 2m or so and if higher than 1.2m also have a middle rail the same material as the top rail.

Pricing above that includes the fitting of pickets use 100mm x 16mm flat top treated pine pickets.  Other pickets can be used for a little more.    

Finishing 

All Aluminium frames are welded, dressed and unpainted because aluminium doesn't rust like steel. You could paint the frame yourself or have it powder coated.

  ... powder coating colours  

When painting an aluminium frame use an "Etch" primer first so the paint will stick.  If you just paint it will fence paint it is more than likely to peal off. If you sand the frame with 80 grit sand paper first this will also help the paint stick.

Steel frames are made from Duragal, which is steel that is already hot dip galvanised and where welded is painted with gal paint. 

The timber pickets are treated pine unpainted, you could paint these yourself.