Features

Anodised Aluminium Front Panel with stainless steel call button and label. 

Weather proof (IP65) and Vandal Resistant

2 Megapixel HD Camera for sharp picture with very wide viewing angle 160o

Colour Night Vision

Can have a WiFi Outdoor Access Point added for wireless connection to home Router or 4G Gateway added for wireless connection to Smartphone App directly using 4G mobile phone network independent from home Internet ( both devices purchased separately). 

Can call up to 5 x Smart Phones with a free iOS or Android App from anywhere in the world there is mobile phone service and/or can call up to 10 x Indoor Monitors. Can be setup to call monitor, then if no answer call a 2nd, 3rd, 4th ... up to 10 monitors sequentually.

If no one answers callers can leave a message. 

Opens 1 or 2 automatic driveway gates or pedestrian gates with an electric lock from Smartphone, Tablet or Indoor monitor Note: for control of 2 gates or doors an expansion module is required purchased separately that connects to the RS485 terminals.

Has inputs for a Press to Exit Button.

Has input to indicate to the Smartphone App or Indoor Monitor that the gate is open or closed. Note: requires an electrical connection to gate motor/lock that has monitoring facilities or installation of position sensor for this to work.

When call button is pressed a voice message lets visitor know what's going on.

Can use more than one Outdoor Station per residence (max. 20) in case there is more than one gate or door.

Outdoor Stations Camera can be viewed anytime from Smartphone, Tablet, Indoor Monitor or IP video surveillance system.

BUY NOW 

Installation Instructions

This intercom is smaller than it looks in the photo, with a surface mounting box will fit neatly on a 100mm wide post. The Flush mounting option has a mounting plate the intercom fits into that is larger. See below for diagrams of the surface and flush mounting options.  

1) Tamper switch - if device pried from wall sound an alarm and alarm is sent to Smartphone or Monitor. 

2) Port A - from left to right terminal as follows:

RS845 Port - GND, +12V, RS485-B, RS485_A

Alarm Output - Alarm_NO, Alarm_COM

Power Input - 12V+, GND

3) Port B from left to right as follows:

Press to Exit Button, Open indicator Input, GND, NC, COM, NO 

4) RJ45 Ethernet Port connects to home Internet Router with a network cable, supports Standard 48V PoE

See Installing Intercoms for more details on making these connections and lots more.

Height and Viewing Angle

H) Viewing angle a very wide 160o

Surface Mounting

The surface mounting box is the same dimensions the intercom so can fit onto a 100mm wide post or wider or on a wall.

1) VTO2201F-P Outdoor Station  2) Water proofing O ring  3) Self tapping screws  4) Surface Mounting Box 

5) Screws for hold outdoor station in  7) Raw Plugs 8) Wall

Screw Surface mounting box to wall with the waterproof pad between the surface box and wall. Use O rings to water proof screws for surface box. Fit the VTO into the surface box that is held in place with two small screws from underneath. 

Flush Mounting

Flush mounting option requires a hole cut in a wall 121mm x 223mm and 33mm deep for the fitting of a flush mounting box that a mounting plate then screws to. The Intercom then fits inside the mounting plate making the intercom look larger once installed.

1) Screws for fixing frame to flush mounting box 2) Water proofing O ring 3) VTO2202F-P  4) Frame the VTO fits into 5) Flush Mounting Box 6) Hole in wall 118mm wide x 154mm high +- 3mm

See Setting Up Dahua Generation 2 VTO's to learn how to set the VTO2202F-P up.