Teltonika TRB140 4G Gateway
Industrial Ethernet to 4G LTE Gateway for securely connecting IP Intercoms or IP Cameras to the Internet with the 4G mobile Phone Network effectively converting an IP Intercom or IP Camera into a 4G one.
Will only work with IP Intercoms and Cameras that connect to a Smartphone App or a 4G Enabled Tablet with an App that could be wall mounted if a wall mounted monitor is required.
Comes with a weather proof ABS enclosure, external antenna and power adaptor. May be powered from a gate motor.
Must be plugged into a computer to setup. Requires a SIM like any mobile device.
Industrial power socket - can be used with supplied power adaptor or lead from this can be can and power fed to it from a gate motor, will accept any voltage from 9 to 30VDC so for 24V gate motors a 24V to 12V connecter will be needed. Draws 40mA on standby at 12V so cannot be powered from a Solar Gate motor unless the Solar system is suitably upgraded.
Ethernet Port - RJ45 Socket, can connect an IP Video Intercom to this directly or if connecting IP Cameras too or other devices a switch can be used, which is basically a network splitter box. A switch may fit into the same enclosure as the Gateway if small enough otherwise a larger enclosure will be needed.
USB Connector - is purely for setup purposes and upgrading.
Mobile Antenna Connector - is an SMA socket for connecting the supplied external Antenna allowing the Gateway to be placed out of the way and the antenna where it gets the best mobile phone signal. If signal is weak then a higher gain antenna may be purchased and fitted.
Reset Button - In case everything goes astray the device can be reset
Specifications
Dimensions: Device is 70mm x 60mm x 18mm and a weather proof enclosure is included that is 171mm x 121mm x 80mm
Mobile Module: 4G (LTE) Cat 4 to 150 Mbps or 3G to 42 Mbps fast enough an IP Intercom.
Network: Has DHCP for dynamic IP Addresses or static and has a Firewall so works much like a Router but for only one device.