King Receiver

A stand alone 2 channel receiver for King remote controls and wireless digital keypads. Can be fitted to a Garage Door Motor so it will work with the same remote controls as a King Gate motor.

Download Manual 

Specifications:

Frequency: 433.92Mhz

Encoding type: Hopping/Rolling Code.

Power supply: 12/24 VAC/VDC 60mA

Has terminal for external antenna. 

Channels: Two so can control two separate devices. Outputs are momentary only does not latch.

Output: Clean relay contact so can control a wide variety of devices. Contact rating 1A 120VAC or 1A 24VDC

Range: up to 100m in ideal conditions. 

Remote control management: A single remote control can be erased but only by using the remote control to be erased. If a remote control is lost or stolen all remote control must be erased and reprogrammed.  

Total number of remote controls that can be programmed into the receiver: 480 

Case dimensions: 70mm x 60mm x 25mm

Weight: 100g

Weather Proofing: Enclosing is sealing from the weather so may be installed outside.