No-weld Spacers - Mill Finish

Spacers that clip in between slats for gates with slats set into the frame. Minimum length of these spacers is 8mm, although slats can be butted hard up against each other with no gap any gap between this and 8mm doesn't look right.

These spacers are actually short lengths of the No-weld slotted infill extrusion cut into short lengths.

Are mill finish that is raw aluminium as it comes from the mill, which has distinctive draw lines from the extruding process if that's the raw metal look you're after. Mill finish Aluminium doesn't rust or degrade in the weather.

Come in pairs, one for each end of the slat. 

Availability

3 to 7 days delivery