Centsys D5 Smart Motor for Sliding Gates to 500kg
Ideal for Single Residences wanting a faster gate operation with a fast gate opening speed up to 600mm/s so can open a 3m light weight gate in about 7s, heavier gates will be slower. Can add up to 1500 remote controls and remove them individually even if lost or stolen so is perfect for Gated Communities and the like. Has a Smartphone App for quick and easy setup and management.
Close speed can be set slower for safety and durability. A powerful 24V motor with dual 12V Batteries built in offers extended battery backup in case of power failure. Requires no strike plates or magnets on the rack ideal for heavier sliding gates in limited space such as Telescopic gates or those with a driveway that has a steep slope across.
Download Manual
Power Options
The motor out of the box plugs into a normal 240V power point at the gate or your electrician can hard wire it to mains power. This motor has a built in battery so will continue to work if there is a power failure. If getting 240V mains power out to your gate is difficult there is a model with Low Voltage Power that can plug in at the house (or where ever a power point is available) so low voltage power cable can be run out to the gate. You can install low voltage cable yourself, you don't need to be a registered electrician. There's also a Solar power option if running any type of power cable isn't practical.
... more about Power Options for Automatic Gates
Features
Adjustable Speed to a quick 600mm/s with fully adjustable soft start and soft stop. The closing speed can be made slower too for improved safety as who cares how long a gate takes to close.
Intuitive Smartphone App makes programming of the many features this motor has easy. Particularly helpful for first time DIY installers and those that want to tweak everything just right.
Condominium Mode - prevents remote controls from closing the gate, which is for when there are many users because if more than one user is trying to open the gate at the same time one could open and the other start closing it without realizing it so if it can open only then there is no confusion. Must be used with auto-close.
Up to 1500 remote controls that can be added and individually removed even if lost or stolen. Ideal for manage many users remote controls
Optional Close after a time delay (Auto-close) adjustable. Photocells are recommended when using Auto-close.
Optional Safety Photocell (Photo Electric Beam) to prevent the gate closing on a vehicle that can also control the closing of the gate immediately after a vehicle has passed through the gate ... more about Safety Photocells
Pedestrian opening facility opens gate only part way to let people on foot in not any vehicles.
Adaptive Obstruction detection the gate will intelligently detect any obstructions and stop/reverse with five levels of sensitivity that can be set separately for open and close.
Oil filled gear box for durability making this motor suitable for high frequency of use, ideal for gated communities.
Keyed Manual Release so the gate can be opened by hand from inside the property
Ant proof housing for electronic controls improving reliability
Motor height is adjustable ideal for sloping driveways.
Ideal when there is limited space because it has no limit switch striker plates at each end of the gate and because of the way the lid is locked it can be placed hard up against a guide post.
Lockable lid for improved security.
Recommended Use
Suitable for all types of residential and commercial sliding gates up to 500kg on flat ground. Can be used for telescopic sliding gates and/or if there is a slope across a driveway but the maximum weight of gate is less.
The sliding gate track must be relatively straight with no sudden rises
... more about sliding gates on sloping ground
What's in the box
D5 operator complete with built in: Charger with 3-pin plug and lead or solar panel for solar versions, control board, remote control receiver.
2 x Remote Controls
Key for opening lid and manual release
Base plate for motor that has adjustable height
2 x 12V 7.2Ah Sealed Lead Acid (SLA) Batteries or for Solar versions 2 x 12V 33Ah Batteries.
Maintenance Requirements
Sliding gate operators required very little maintenance although it is a good idea to remove the lid once a year and the motor checked for any ants or other small vermin. Ants and any droppings should be cleaned out, holes where they could get in sealed up with silicon sealer and repellent placed in or around the motor.
The rack should also be checked and adjusted by opening and closing the gate while looking at the output gear of the motor where it contacts the rack making sure there is a clearance of 1mm or so. If the motor runs noisy once the rack has been adjusted the motor may need to be pulled apart and gearing cleaned with new grease applied or bearing may need replacing.
The battery needs regular checking. Using a multi-meter check the voltage on the battery as the gate is being opened and closed. The voltage should hold above 12.5V on each battery if the battery is in good condition. If either battery drops below 12V during any stage of the gate movement then both need replacing.
Specifications:
Maximum gate weight 500kg
Standard Version:
Maximum Speed adjustable to: 600mm/s
Start up force: 30kg
Running force: 17kg
Motor: 24VDC; 240 Watt; 50% duty cycle
Open and Close limit system: hall effect sensor with Smart onitoring.
Power system: runs from a 2 x 7.2Ah battery and charged from mains power.
Battery Charge Current: 2A
Maximum Operations per day: 150
Life expectancy of motor: 500,000 cycles ... more
Remote control frequency: 433.92 Mhz
Remote control coding: rolling code.
Maximum number of remote controls: 1500
Warranty: 24 months